A) The Color FieldThe circle inside the large square of colors indicates which color is currently selected in the Color Picker. You can click anywhere in this square to change the selected color.
The square is 256 levels of saturation (vividness) across the top, from pure white to pure hue (color; in this case, a bright blue). The square is 256 levels of value (lightness/darkness) from top to bottom, adding more black as you go down, until the color is pure black at the very bottom edge. This means there are 65,536 possible colors in this square alone.
B) The Color Spectrum SliderBut what if you don’t want blue? No problem. The Color Spectrum Slider to the right of the large square offers a range of 256 hues like a rainbow. Just click on the rainbow band, or drag the slider up or down. You will see the overall hue change in the large square.
The best practice when you want to completely change the current color is to start with B (the Color Spectrum Slider), and then narrow your choice to a particular value and saturation in A (the Color Field).
If you multiply the 256 hues in the Color Spectrum Slider with the 65,536 colors in the Color Field, you get 16,777,216 colors available in the Color Picker.
C) The Current Color and D) The Previous ColorThese rectangles allow you to see your new color selection on the top, and compare it to your previously selected color on the bottom.
Comparing the two colors comes in really handy if a shade of green is not quite natural enough, for example, and you want to add a touch of gray or brown. Or if you are coordinating two colors in a color scheme and want one color to be the same intensity as another, but a different hue (like a muted blue with a muted green.)
E) RGB Color ValuesRGB refers to Red, Green and Blue. Unlike the traditional color wheel where red, yellow and blue are the primary colors from which everything else is mixed, monitors have primaries of red, green and blue. That is because the colors on monitors is created with light instead of paint or ink.
Each of these values can be anywhere from zero to 255, making 256 possible values. 256 for red x 256 for green x 256 for blue = the approximately 16.8 million colors we talked about above.
Zero in the Red box means that no red is contributing to the selected color. 255 in the Red box means that Red is as strong as it can possibly be in the selected color. Ditto for Green and Blue.
- You can get a pure red with R:255, G:0, B:0.
- You can get a pure green with R:0, G:255, B:0.
- You can get a pure blue with R:0, G:0, B:255.
- You can get a pure yellow with R:255, G:255, B:0.
- You can get a pure magenta with R:255, G:0, B:255.
- You can get a pure cyan (blue-green) with R:0, G:255, B:255.
- You can get a pure white with R:255, G:255, B:255.
- You can get a pure black with R:0, G:0, B:0.
- An equal number for all three colors (other than 0 or 255) will get you various shades of gray; the higher the number, the lighter the gray.
By the way, RGB is referred to as an Additive Color Mode, because when you add all the primaries together at full strength, you get pure, white light.
F) Hexadecimal Color ValueHexadecimal values are used to indicate colors on the Web. They are composed of a pound sign (#) that is followed by six characters. The characters can be the digits 0 through 9 or the letters A through F. Hexadecimal values make it easy to copy and paste and entire color formula from one place to another, for example from Photoshop to Illustrator.
Hexadecimal values are like RGB values but expressed in a different format. The first two digits are for Red, the second two for Green, and the last two for Blue. Because each digit can be any of sixteen values, a two-digit combination can represent 256 values. See how that relates to RGB? And similar to RGB mode, a double-zero means no color (or black if all six digits are zero.) What is special in Hexadecimal is that after 9, the brighter colors go from A to F.
Here are some Hexadecimal colors:
- White: #FFFFFF
- Black: #000000
- Red: #FF0000
- Green: #00FF00
- Blue: #0000FF
G) CMYK Color ValuesCMYK stands for Cyan, Magenta, Yellow and Key color (black). CMYK is the color mode used for printing presses. More or less the opposite sort of color wheel from RGB, CMYK is called subtractive color. That means that one subtracts all color to reveal white (that is, the white of the paper).
The values for C, M Y and K are expressed as percentages. These percentages represent how much of that color ink would be printed on paper. For example, C at %100 means that a particular area would get 100% percent coverage of Cyan. We will not be using CMYK often in these tutorials, so I won’t go into greater detail here.
The HSB values are for Hue, Saturation and Brightness. This is another way to control color. Hue means the given name for a color, Saturation means the strength or vividness, and Brightness means how close it is to white.
The OK button saves your color change and closes the Color Picker.
The Cancel button closes the Color Picker without making changes.
The Color Swatches button lets you access a multitude of preset colors.
The Only Web Colors checkbox is a throwback to when many people did not have monitors that displayed 16.8 millions colors. It makes the Color Field show only what were once called “Web-Safe” colors. Don’t worry about this.